🎯 Plan for Bullseye changes

[JRAlexander]

https://www.raspberrypi.com/news/raspberry-pi-bullseye-update-april-2022/#comments

[scotstan]

• upgrade splash so show version
• test from clean Bullseye image
• strategy for default pi username and password
• test upgrade path from Buster (v10)
• moby certificates might be expired?
• remove hardcoded /home/pi references

[scotstan]

opencv install from os/setup fails with this error:

[scotstan]

Seeing this in dmesg boot log:

Rebooting after setup found /dev/ttyAMA1

[scotstan]

Manual setup worked. Now encountering camera issues (joystick crashes). Issues in diagnose

https://www.tomshardware.com/how-to/use-raspberry-pi-camera-with-bullseye

[scotstan]

No picamera support re:
https://www.raspberrypi.com/news/bullseye-camera-system/

[scotstan]

Bullseye uses Python 3.9.2 and "we won't change that".

ctrl-alt-t opens a terminal window in the wizard environment. From there sudo cancel-rename pi will restore original pi user (this is per the comments from above).

[scotstan]

ctrl-alt-t opens a terminal window in the wizard environment. From there sudo cancel-rename pi will restore original pi user (this is per the comments from above).

Also the base OS is built with pi-gen according to /etc/rpi-issue

cat /etc/os-release

[scotstan]

Notes from one of the lead devs on updating from buster to bullseye:

[scotstan]

The Moab wide-angle camera is "OV5647"

| For a CM4 on Waveshare Nano carrier board, I had to follow these steps to enable the camera.